The equine hoof is often manipulated in purpose to achieve a better stride or to reduce the weight on damaged tissue. The living tissue in the hoof can?t store energy as glycogen and is therefore depending on a continuous supply of glucose for its energy production. The purpose of the study was to determine if wedging (i.e. elevating) the heel could influence the hooves glucose and lactate consumption/production. Five standardbred horses were trained to trot on a treadmill without getting physical or mentally tired.

AbstractIntroductionWedged shoe insoles are used as a treatment for different problems in order to change the ground reaction force. They can secondary cause different loading patterns under the foot compared to normal. No previous study has, to the author?s knowledge, clinically evaluated the plantar foot pressure with different full-length wedges in normal persons.PurposeThe purpose was to evaluate the plantar pressure with different degrees of full-length wedges in normal persons.MethodTwenty persons with normal feet have participated in this single blind study. Wedges were produced clinically in four different shapes, 3° valgus, 0° flat, 3° varus och 6° varus.

This study will analyze and interpret the performance art piece The Last Strawcreated by the artist group High Heel Sisters. The aim is to search for potentialfeminist strategies in their deconstructive ways of incarnating gender and bodiesusing the notion of performativity and phenomenological theories.My study shows that the diversity of this art performance creates a complex platformwere discussions about gendered corporeality and spatial power relations are beingnegotiated..

This thesis is about making a support for barcode readers and RFID readers on a computermounted in heavy vehicles. The computer has several applications designed for heavyvehicles such as an order handling application. The goal was to suggest an architecture toimplement a support for the readers. The architecture should be independent of whichmanufacturer who has made the reader hardware that was connected to the computer.At first a theoretically study was made around RFID technology and standards for thetransport and supply sector. Then the architecture was developed and a demo implementationwas made.The conclusion of this thesis is to implement support for barcode readers with a wedgeapplication.

High heels ? a fashion that has not gone out of style after hundreds of years. Despite their esthetic advantages, high heels become uncomfortable and harmful after repetitive and long term use. With this as a starting point, Huyen Nguyen ? a student at the Innovation Engineering Program at the University of Halmstad ? decided to make a final thesis project. The project goal has been to combine the esthetic advantages of high heels and bring a comfortable solution to the equation.

Claw health has been recorded by claw trimmers at trimming in Sweden since 1996, but data was then captured at each AI association. From 2003 data was captured by central scanning and entered directly to the national cow data base at the Swedish Dairy Association (SDA). This reporting was introduced because SDA wanted to be able to use these records to improve dairy cow claw health by breeding. It is desirable with cows that have healthy claws, because poor claw health can contribute to impaired production and fertility. The claw health report begins with some information about herd, claw trimmer, date et cetera and continues with the part where the claw health is recorded. Here the ID of each cow is filled in and on the same row the conditions for dermatitis, heel horn erosion, sole haemorrhage and sole ulcer are recorded as no lesion (blank), slight lesion (/) or severe lesion (X).

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

Changing of the hoof angle is a common method for the treatment of many lameness-related conditions (Moyer 1980; Stashak 2002). Various studies in the literature have indicated different results of the effect of changing the hoof angle on the movement of the distal limb. Our study investigated the effect of raising the heel of the forelimbs by 10,7 mm on the movement of the distal limb. Horses trotted on a treadmill at several predetermined speeds. The kinematics of the distal limb was determined and variables including the extension of the fetlock joint were determined.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

KRAV-certified organic dairy herds generally have a lower milk yield than conventional dairy herds. A high-level of milk yield requires a feeding regime with high amounts of concentrates, a factor known to contribute to the development of claw lesions (Bergsten, C. 2003). The aim of this study was to compare claw health between organic and conventional dairy herds in free and tie stall systems. The number of herds from different domestic animal health associations was chosen in proportion to the association´s total portion of Swedish dairy producing herds of each type, respectively.

Metabolic diseases in dairy cows are considered to increase the risk for claw lesions, most of all laminitis, sole haemorrhages and sole ulcers, but also to increase the risk for environmental claw lesions. The aim of this study was to compare claw health in 27 Swedish dairy farms, 18 with high incidence of metabolic diseases and 9 with low incidence. Data on claw health status was retrieved from recordings at routine claw trimmings and analysed on herd level regarding the prevalence of: any lesion, interdigital dermatitis, heel-horn erosion, sole haemorrhages, sole ulcer, lameness, abnormal claw shape, and other diseases (abscess in the white line, limb disorders, double sole, laminitic groove, white line disease, interdigital phlegmon, interdigital hyperplasia, toe abscess and verucose dermatitis). Mean prevalence of any lesion for herds with low incidence of metabolic diseases was 48 % and in herds with high incidence 41 %, and there was no statistical difference between the two groups. Mean prevalence for interdigital dermatitis was 2,0 % and 6.4 % in the low and high incidence groups, respectively (p.

This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

This is a thesis presents a differential gear which is found in a tracked vehicle called BvS10. The tracked vehicle is manufactured by BAE Systems Hägglunds AB in Örnsköldsvik, Sweden. The differential gear has a bolted house. The differential meets the requirement specifications, but the problem is that the bolts are sheared off because of the extreme torque that the differential is exposed to resist.Previous report on the differential show pictures of bolts which have been sheared off at the threads. This report is also includes three lists that explain seven different proposals which some are approved and some are not, and the report also presents the force, tensile, and shear stress.In a bolted connection there is both axial tension stress and radial shear stress, which can lead to wear out and broken bolts.

The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.